plastic deformation的例句大全

The erosion mechanism at 90 degrees includes block exfoliation, the plastic deformation of binder phase and the extrusion of the carbides, meanwhile, the brittle fracture character has also been observed with a speed of 420 meters per second.

90°冲蚀机制包括块状剥落，粘结相的塑性变形和碳化物的挤出，420m/s冲蚀的粘结相还表现出了脆性断裂的特点，块状剥落是质量磨损率升高的主因。

The basal plane grain will "remain" through high temperature plastic deformation because of its feature that easy to form and difficult to disappear.

其中，基面晶粒因易于生成难以消除的特点会在高温塑性变形过程中残留下来。

When two dissimilar metals differ greatly in strength, using a pressure maintain cavity is one of the effi-ciency method to overcome difficulty because of the severe plastic deformation.

两种强度相差较大的异种金属进行摩擦焊接时，使用保压腔是克服由于软金属的大量塑性变形而给焊接过程带来困难的有效手段之一。

Measuring Plastic Deformation on Metal Surface Through Laser Diffraction Spectrum

激光衍射谱测量金属塑性变形的方法研究

A5% Maximum Principal Strain Criterion to Prevent Gross Plastic Deformation

防止承压设备总体塑性变形的5%最大主应变准则

Based on a dislocation dynamic model, a dependence between the second invariants of the inelastic deformation rate and those of stress deviator is proposed and thus a rate-dependent visco/ plastic constitutive equation is built.

基于一种位错动力学模型建立了非弹性应变率偏张量第二不变量与应力偏张量第二不变量之间的函数关系，由此给出一种粘塑性本构方程。

After liquid phase sintering, the WCu composites have been deformed by hot hydrostatic extrusion and subsequent hot extrusion, during which the plastic deformation of tungsten particle is not obvious.

通过对W-40wt%Cu液相烧结坯进行一次热静液挤压和后续的热挤压变形的实验，发现钨铜材料在一次挤压和二次挤压后，其钨颗粒并没有明显的大的塑性变形。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象：第二相颗粒的回溶，合金基体重新形成过饱和固溶体。

The aeolotropic property is increased by plane texture because of forging, that goes against the improvement of plastic deformation and mechanical property of magnesium alloy.

锻造产生的面织构将增加镁合金的各向异性，不利于改善镁合金的塑性变形能力和力学性能。

Analysis of superplastic deformation of backward extrusion by the rigid plastic finite element method

用刚塑性有限元法分析超塑性反挤压成形

The results of the tests show that the DYC is due to the martensite deformation from the elastic state to the plastic state and the microvoid formed from the interphase boundaries.

试验结果指出，双相钢的双屈服特性的产生是由于马氏体相从弹性变形过渡到塑性变形以及相界面微空洞萌生的结果。

It is found that, on repeated impact force, the various of failure mode of the components include the surface crackle, surface plastic deformation, corrosive pitting and coat collapse, etc.

发现在反复多次冲击碰撞力作用下，覆层零件表现出表面裂纹、表面塑性变形、表面点蚀和覆层崩落等多种失效形式。

The experiment content is the acoustic emission instrument detects the process of the pipes' plastic deformation until their rupture; then the results can be obtained with Matlab programs.

实验内容是：声发射仪检测带环向穿透裂纹管塑性变形，直至断裂的过程。接下来，用Matlab编程算出结果。

In this paper, the theories of elastic plastic mechanics and the finite deformation geometry are applied to study the question of surface displacement mechanism and displacement computation by mining below thick alluvia. It has an important guidance for controlling coal mining damage.

本文应用弹塑性力学理论及有限力学变形理论，研究了厚冲积层下开采地表移动的机理与移动量计算问题，对有效地控制地下开采损害具有重大指导作用。

Plastic Deformation of Amorphous Materials Induced by Swift Heavy Ion

快重离子引起的塑性形变现象

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

Spiral coil pipe is shaped by means of utilizing the effect of intermediate frequency induction in order to quickly heat the limited area of a steel pipe, making the heated pipe within its plastic deformation range follow the preset track at a definite speed.

螺旋盘管的成型是利用中频感应效应使管子在小区域内快速加热，被加热的管子在其塑性变形范围内，按预先设定的轨道以一定的速度向前推进达到成型。

Research on the new defining method of elastic-plastic deformation area of steel tube straightening

钢管矫直时弹、塑性变形区的判定

The specimen irradiated by intense laser generates distinct plastic deformation, and the profile of axial cross section of specimen after shocking is similar to a coniform figure.

结果表明：在强激光冲击下，试样发生显著的塑性变形，变形后轴截面形状为类圆锥形；

The thermal contact conductance model under plastic deformation was obtained by analyzing the experimental data.

通过对实验数据进行回归分析,得到了在接触副材料发生塑性变形条件下的接触热导率模型.